Tools Needed:
Trigger Pull Gauge
Allen Wrench Set
Knife
First, check your starting trigger pull with the trigger gauge.
Remove the housing surrounding the trigger housing using the allen wrenches. Make not if the any screws or bolts are different sizes.
Once the housing is off, you can use a knife to pop any sealant out of the screw used to adjust the pull strength.
Using an allen wrench, make slight adjustments clockwise to increase the pull weight and vice-versa to decrease the pull weight. Be certain to make small increments and test using the trigger gauge.
When you’ve got the trigger to the amount of pull desired, replace the housing around the trigger and get ready to hunt!